1. See the paper guides in the related tray, if there is greater than 1 installed. If the guides are not aligned properly, the paper will not sit properly in the tray and hence paper misfeeds are likely.
2. If all the guides are aligned properly then clean the hopping roller and pick-up pad. The pick-up pad is usually got at the frontage of the tray in the centre. It is typically a grey rubber quadrangle installed on a spring loaded bracket.
Proper paper handling is solution to make sure trouble-free printing. Though, sometime paper jams take place.
You can enhance paper feeding and shun jams in your printers, by following these steps:
Loading the Paper: At the time of loading paper, buff the stack of paper prior to placing it in the tray. It will shake out any dust from the paper dust.
Recommended Media: Use the paper that is specified for the printer
Cleaning: Sometimes clean the rubber rollers within the region that holds the paper tray using a soft cloth.
Ans.Use the below given instructions to load paper into the paper tray:
Ans.If you experience any kind of print quality issues for instance, faint print, streaking, or missing prints, then the foremost thing you should do is to clean the LED heads. These LED heads are situated at the top cover of the printer, they are slim black glass strips, which hang downside from the peak cover. While the printer’s upper cover is open, the LED heads will be viewing you directly. Clean all the x4 LED black glass strips employing an alcohol wipe and soft tissue or a soft cloth.
This error reveals that the toner cartridge is not fixed properly.1.Press the cover free (A) and unlock the output tray completely.
If the toner cartridge is fixed glide the lock to the right to undo the toner cartridge for the time being, and then slip the lock back to the left to safeguard the toner cartridge.
The printer prints on the paper of a dimension dissimilar from what is prescribed for printing. Verify the dimension and orientation of the loaded paper in the tray signified by the error. 1. Check the paper dimensions and orientation given on the paper dial of the paper-feeding tray shown by the error. 2. Drag the cassette out from the tray wherever the error has happened and validate the dimension and direction of the paper within the cassette. If the paper dimension or direction given on the size dial is dissimilar from that of the paper within the cassette, pursue the process beneath to modify the paper. 3. Fix the paper guide and then paper stopper to the paper dimension and direction recommended son the paper dial. 4. Dust the paper well, level align the sides of paper, and then load the paper into the cassette keeping the print side facing down. 5. Set the paper in place through the paper guide and paper stopper. 6. Put in the paper cassette again into the tray. 7. Drag the lever, and then again open and close the facade cover to attempt printing again.